hanzlaser.com Official Website > service > technical support > Cleaning Procedures of Lens of Laser Cutting Machine

Cleaning Procedures of Lens of Laser Cutting Machine

Updated:2011/7/5 1:27:33  Source:hanzlaser  Edit:hanzlaser  Views:

Cleaning Procedures of Lens of laser cutting machine 

 
Lens is the most important part for the output of light. Sometimes, lens contamination may result in no light or thick light spot.
 
Therefore, the lens should be cleaned regularly.
 
 
Cleanings should be as following procedures:
 
1、Carefully take the lens out from the box and place on a clean platform
 
2、 Soak the cotton swab with cleanout fluid
 
3、 Brush the surface of the lens
 
4、 Brush repeatedly till no ash and oil remained on the surface of the lens
 
5、 Air drying
 
6、Don’t touch with hand and blow with mouth while assembling
 
7、Put the lens back to original positio
Send to a friend
Serivces
Search Serivces
Online Contuslting
msn:zgzg1125@hotmail.com
skype:lisaseekcn
QQ-contact us
Hanzlaser On
  Hanzlaser on Facebook
http://www.facebook.com/
  hanzlaser on youtube
http://www.youtube.com/user/Hanz..
  Hanzlaser on Twitter
https://twitter.com/hanzlaser1
  hanzlaser on Wikipedia
http://en.wikipedia.org/wiki/Mai..
  hanzlaser in linkedin
www.linkedin.com